- Wirecut electrical discharge machining
- Die-sinking electrical discharge machining
- Electrochemical machining
- Curved hole processing
Curved hole machining
Curve hole machining is a new technology of the Company that can be processed a hole with a curvature(R).
Curved hole machining three types, the first technology can be processed at a constant R, the second the technology can be processed by combining two curvatures, the third the technology can be processed leading from the straight to R shape.
It should be noted, can be processed materials is stainless steel, Hastelloy, Inconel.
System in the electrical discharge processing business
1.We can consistently processing to delivery from the purchase of material.
2.Available upon contract processing also happily in semi-finished products and prototypes.
3.Equipment sales in conjunction to the processing content and corresponding to meet the customer's needs is possible.
Strength in the electrical discharge processing business
(1)Processing track record over more than half a century.
(2)Japan's largest in the full-time of electrical discharge processing (metal working).
(3)It can be a wide range of support from micro processing to large processing.
(4)We realized the processing reform and cost reduction by developed in-house special-purpose machine.
Introduction of the cases
Of the current stage processing technology
|Processing method||Electrical processing|
Hole diameter φ1.0～φ3.0
|Processing speed||0.5mm/min～0.8mm/min (Depending on the workpiece)|
|Material||stainless steel, Hastelloy, Inconel|
Processed 1 type of
curved hole processing.
|coordinates center of circle (X,Y)||(1020,0)|
Processing performance: processing into a flange shape
|coordinates center of circle (X,Y)||(222，0)|
Method to order
|X：X coordinate of RC||400|
|Y：Y coordinate of RC||0|
|D：depth of hole||300|
※RC：center point of circle of radius R
|Method to order||HSK-TypeR||DIA||R||X||Y||D|
Curved hole processed a
combination of the types
(We can process blind hole
because it is the processing
from the one-way.)
|coordinates center of circle１(X1、Y1)||(1142,0)|
|coordinates center of circle2 (X2,Y2)||(1177,-400)|
method to order
|X1: X coordinate of RC1||400|
|Y1: Y coordinate of RC||0|
|R2: R size||1200|
|X2: X coordinate of RC2||-500|
|Y2: Y coordinate of Y||-400|
|method to order||HSK-TypeS||DIA||R1||X1||X2||D||R2||Y1||y2|
the Curved hole processing of
a combination of
straight and curve
|coordinates center of circle (X,Y)||(-315, 180)|
method to order
|R: R size||400|
|X: X coordinate of RC||311.5|
|Y: Y coordinate of RC||-200|
|SD: straight line depth||200|
*It is SD=Y.
RC: center of arc of Curved hole
|method to order||Type-J||DIA||R||X||Y||D||SD|
"I would like to a combination processing like this, you can?" etc., please consult anything about Curved hole processing.
16th Kansai Mechanical Components & Materials Technology Exhibition
17th Mechanical Components & Material Technology Exhibition
100-2, Tsurui, Akaiwa-shi, Okayama-ken, Japan.
Phone Number: +81-086-995-3100
Fax Number: +81-086-995-3200